E Solar Shoppe
E Solar Shoppe
Moosapet, Hyderabad, Telangana
SEND SMS
SEND EMAIL

SOLAR GEYSER SPARES

ESolar ShoPpe is largest retailer of solar heater spares like solar collectors, Hot water storage tanks, Heater element backups, Control valves like Air relief valves, Pressure reducing Valves, Thermostatic Mixing Valves, Thermal expansion tanks, EPDM Hydraulic Rubber Hose connectors, Rubber gaskets, Silicon washers, Evacuated Tube Collectors etc.

Solar ETC Tube 47 x 1500 Dia

Solar ETC Tube 47 x 1500 Dia
  • Solar ETC Tube 47 x 1500 Dia
Get Best Quote
Approx. Price: Rs 900 / Piece

Product Details:

Minimum Order Quantity1 Piece
Tube Size47 x 1500 Dia

Request
Callback
Yes! I am interested

Solar ETC Tube 58 x 1800 Dia

Solar ETC Tube 58 x 1800 Dia
  • Solar ETC Tube 58 x 1800 Dia
Get Best Quote
Approx. Price: Rs 900 / Piece

Product Details:

Minimum Order Quantity1 Piece
Tube Size58 x 1800Dia

Request
Callback
Yes! I am interested

Silicone Washers

Silicone Washers
  • Silicone Washers
Get Best Quote
Approx. Price: Rs 45 / Piece
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

ETC Tube Dust Cover Black Washers

ETC Tube Dust Cover Black Washers
  • ETC Tube Dust Cover Black Washers
Get Best Quote
Approx. Price: Rs 15 / Piece
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Swarna Heating Elements

Swarna Heating Elements
  • Swarna Heating Elements
Get Best Quote
Approx. Price: Rs 950 / Piece
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Makeup Tanks

Makeup Tanks
  • Makeup Tanks
  • Makeup Tanks
  • Makeup Tanks
Get Best Quote
Approx. Price: Rs 2,900 / Piece
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

EPDM Hydraulic Rubber Hose Pipes

EPDM Hydraulic Rubber Hose Pipes
  • EPDM Hydraulic Rubber Hose Pipes
  • EPDM Hydraulic Rubber Hose Pipes
  • EPDM Hydraulic Rubber Hose Pipes
  • EPDM Hydraulic Rubber Hose Pipes
  • EPDM Hydraulic Rubber Hose Pipes
Get Best Quote
Approx. Price: Rs 1,450 / Piece

Product Details:

Minimum Order Quantity1 Piece
Size1''-2''
Unit Length1m-6m
MaterialRubber
ColorBlack
TypeHydraulic Hose Pipe

Components:

Sizes available 3/4
Hydraulic jacketed EPDM rubber hose to withstand 10 bar pressure
End joints mechanically sealed with Brass flanges.
High superior leak proof fasteners.
Request
Callback
Yes! I am interested

Rubber Gaskets

Rubber Gaskets
  • Rubber Gaskets
Get Best Quote
Approx. Price: Rs 25 / Piece
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Brass Flanges Gasket

Brass Flanges Gasket
  • Brass Flanges Gasket
Get Best Quote
Approx. Price: Rs 150 / Piece
In order to attain the maximum satisfaction of our esteemed clients, we are engaged in trading and supplying Solar Flange Gasket. This flange gasket is used for connecting the pipe lines of solar system. The provided flange gasket is precisely manufactured at vendors' end using the finest quality raw material with the aid of latest technology. Furthermore, we also provide this flange gasket to the clients at pocket-friendly prices.

Features:

  • Fine finish
  • Rust proof
  • High strength
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Air Valve

Air Valve
  • Air Valve
  • Air Valve
Get Best Quote
Approx. Price: Rs 1,250 / Piece
HYDRAULIC FEATURES
The " model automatic air vent is an automatic valve with single float, used for the evacuation and discharge of large volumes of air from water supply pipes. The integrated tap device is equipped with a dual position 90° male seal. Position "A" communicates the system with the upper air discharge recess while position "B" bypasses the system discharge recess and permits its draining through the front slot. This renders it particularly ideal for installation in zones outside buildings where there is a high risk of freezing. The air vent valve may only be installed vertically. In order to maximize the efficiency of the discharge, it should be installed at the highest points in the system or, if this is not possible, a TEE fitting should be installed at the input, as in figure "C". When installing it at the top of an ascension pipe, a conveyable discharge hose can be installed (option available only on request). The particular spherical profile of the internal floater-obturator in special thermoplastic rubber forestalls water spatter during the sealing phase, in closure. The absence of sliding guides, hence drag, allows the spherical floater an elevated velocity and precision in closing besides avoiding dangerous incrustations. At the discharge outlet there is a protective catch for dust and lint, which, over time, could deposit upon the opening of the cap, obstructing it; moreover, being perforated, anti-tampering seals may be used in compliance with legislation currently in force.

The lower anti-spray guard allows the hydraulic thrust to be distributed evenly across the entire surface of the sphere, limiting
TECHNICAL FEATURES
Pressure :
Maximum allowable working pressure (PN)16 bar
minimum accumulation0.5 bar (Grade A according to EN 12266-1)
Range of operation air evacuationfrom 0.5 bar to 16 bar (tolerance ± 10% max. detected)
Temperature :
maximum working temperature (TS)0° C(excluding ice) +110°C
minimum plant storage-20° C (with recess fluid discharged)
Threading:
Pipeline connectionThreads according to ISO 228/1
Requirements and tests as per:
Air ventsEN 1074-4
Seat tightnessEN 1074-4 §5.2.2
Stop deviceEN 1074-2
Pressure tightnessEN 1982 B.7
Pressure resistanceEN 1074-4 §5.1.1
DESIGN
Cast brass body and maleEN 1982 - CB753SEN 1074-4
Cap in brassEN 12165 - CW617N
O-ringNBR RUBBER
Spherical floaterTHERMOPLASTIC ELASTOMER
Sphere guardACETAL RESIN (POM)
PRODUCT SIZE
20 - M - 3/4"
25 - M - 1"
33 - M - 1" 1/4


Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Temperature & Pressure Relief Valves

Temperature & Pressure Relief Valves
  • Temperature & Pressure Relief Valves
  • Temperature & Pressure Relief Valves
Get Best Quote
Approx. Price: Rs 2,800 / Piece
OPERATION INSTRUCTIONS

Using Method: Temperature & Pressure relief valves is suitable for bearing the pressing type solar water heater, gas heater, electrical heater, water heater of fuel, water heater of heat pump, sensitive function heater, etc. various kinds of heaters (such as the boilers) and hot water containers, can lower the temperature and reduce pressure automatically, have temperature and pressure double safe protection function.

TECHNICAL PARAMETER
  • Standard Setting: 75, 87,100, 125,150psi (0.517, 0.6, 0.69, 0.86, 1.034MPa)
  • Temperature Relief: 210°F (99°C)
  • Dimensions / Weight
ModelImportxExport
in
A
mm
B
mm
D
mm
T
mm
Weight
g
Temp.Steam
Rating BTU/hr
15R½ x Rp½41822910123715,000
20R¾ x Rp¾428329100258100.000


Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Hose Clamps

Hose Clamps
  • Hose Clamps
  • Hose Clamps
  • Hose Clamps
Ask For Price
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Solar ETC Tube 58 x 2100 Dia

Solar ETC Tube 58 x 2100 Dia
  • Solar ETC Tube 58 x 2100 Dia
Get Best Quote
Approx. Price: Rs 1,350 / Piece

Product Details:

Minimum Order Quantity1 Piece
Tube Size58 x 2100 Dia

Request
Callback
Yes! I am interested

Solar ETC Tube 70 x 1800 Dia

Solar ETC Tube 70 x 1800 Dia
  • Solar ETC Tube 70 x 1800 Dia
Get Best Quote
Approx. Price: Rs 1,600 / Piece
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

FPC Collector

FPC Collector
  • FPC Collector
Get Best Quote
Approx. Price: Rs 9,500 / Piece
FPC COLLECTOR Makes Copper to copper with 9 rise pipes absorber area 2Sq.meters.
Dimensions:1m Width, 2m Height
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Solar Hot Water Storage Tank FPC Gravity 100lpd

Solar Hot Water Storage Tank   FPC  Gravity  100lpd
  • Solar Hot Water Storage Tank   FPC  Gravity  100lpd
Get Best Quote
Approx. Price: Rs 13,800 / Piece

Product Details:

Minimum Order Quantity1 Piece
Storage Capacity (litres)100LPD

HOT WATER STORAGE TANK FPC GRAVITY less than 0.5 kg. 

Material

SS-304 or CRCA Enamel Coat

Tank Capacity

100-L

Thickness

0.8 mm

Prices INR

13800

Material

SS-304 or CRCA Enamel Coat

OUTER TANK (SHELL)

Thickness 0.4mm Steel Powder coated

INSULATION

Material

PUF-50mm Thk

Density

32Kg/CBM

Request
Callback
Yes! I am interested

Solar Hot Water Storage Tank FPC Gravity 200lpd

Solar Hot Water Storage Tank   FPC  Gravity 200lpd
  • Solar Hot Water Storage Tank   FPC  Gravity 200lpd
Get Best Quote
Approx. Price: Rs 21,800 / Piece

Product Details:

Minimum Order Quantity1 Piece
Storage Capacity (litres)200LPD

HOT WATER STORAGE TANK FPC GRAVITY less than 0.5 kg. 

Material

SS-304 or CRCA Enamel Coat

Tank Capacity

200 L

Thickness

1 mm

Prices INR

21800

Material

SS-304 or CRCA Enamel Coat

OUTER TANK (SHELL)

Thickness 0.4mm Steel Powder coated

INSULATION

Material

PUF-50mm Thk

Density

32Kg/CBM

Request
Callback
Yes! I am interested

Solar Hot Water Storage Tank FPC Gravity 300lpd

Solar Hot Water Storage Tank   FPC  Gravity 300lpd
  • Solar Hot Water Storage Tank   FPC  Gravity 300lpd
Get Best Quote
Approx. Price: Rs 26,900 / Piece

Product Details:

Minimum Order Quantity1 Piece
Storage Capacity (litres)300LPD

HOT WATER STORAGE TANK FPC GRAVITY less than 0.5 kg. 

Material

SS-304 or CRCA Enamel Coat

Tank Capacity

300 L

Thickness

1 mm

Prices INR

26900

Material

SS-304 or CRCA Enamel Coat

OUTER TANK (SHELL)

Thickness 0.4mm Steel Powder coated

INSULATION

Material

PUF-50mm Thk

Density

32Kg/CBM

Request
Callback
Yes! I am interested

Solar Hot Water Storage Tank FPC Gravity 500lpd

Solar Hot Water Storage Tank   FPC  Gravity 500lpd
  • Solar Hot Water Storage Tank   FPC  Gravity 500lpd
Get Best Quote
Approx. Price: Rs 32,900 / Piece

Product Details:

Minimum Order Quantity1 Piece
Storage Capacity (litres)500LPD

HOT WATER STORAGE TANK FPC GRAVITY less than 0.5 kg.

Material

SS-304 or CRCA Enamel Coat

Tank Capacity

500 L

Thickness

1.5 mm

Prices INR

32900

Material

SS-304 or CRCA Enamel Coat

OUTER TANK (SHELL)

Thickness 0.4mm Steel Powder coated

INSULATION

Material

PUF-50mm Thk

Density

32Kg/CBM

Request
Callback
Yes! I am interested

Solar Hot Water Storage Tank FPC Gravity 1000lpd

Solar Hot Water Storage Tank   FPC  Gravity 1000lpd
  • Solar Hot Water Storage Tank   FPC  Gravity 1000lpd
  • Solar Hot Water Storage Tank   FPC  Gravity 1000lpd
Get Best Quote
Approx. Price: Rs 59,900 / Piece

Product Details:

Minimum Order Quantity1 Piece
Storage Capacity (litres)1000LPD

HOT WATER STORAGE TANK FPC GRAVITY less than 0.5 kg.

Material

SS-304 or CRCA Enamel Coat

Tank Capacity

1000 L

Thickness

2 mm

Prices INR

59900

Material

SS-304 or CRCA Enamel Coat

OUTER TANK (SHELL)

Thickness 0.4mm Steel Powder coated

INSULATION

Material

PUF-50mm Thk

 

Density

32Kg/CBM

Request
Callback
Yes! I am interested

Hot Water Storage Tank FPC Pressurised 100lpd

Hot Water Storage Tank   FPC  Pressurised 100lpd
  • Hot Water Storage Tank   FPC  Pressurised 100lpd
  • Hot Water Storage Tank   FPC  Pressurised 100lpd
Get Best Quote
Approx. Price: Rs 18,900 / Piece

Product Details:

Minimum Order Quantity1 Piece
Storage Capacity (litres)100LPD

HOT WATER STORAGE TANK FPC PRESSURISED upto 4kg. 

Material

SS-304 or CRCA Enamel Coat

Tank Capacity

100-L

Thickness

2.5 mm

Prices INR

18,900

Material

SS-304 or CRCA Enamel Coat

OUTERTANK (SHELL)

Thickness 0.4mm Steel Powder coated

INSULATION

Material

PUF-50mm Thk

Density

32Kg/CBM

Request
Callback
Yes! I am interested

Solar Hot Water Storage Tank FPC Pressurised 200lpd

Solar Hot Water Storage Tank   FPC  Pressurised 200lpd
  • Solar Hot Water Storage Tank   FPC  Pressurised 200lpd
  • Solar Hot Water Storage Tank   FPC  Pressurised 200lpd
Get Best Quote
Approx. Price: Rs 27,900 / Piece

Product Details:

Minimum Order Quantity1 Piece
MaterialMetal
Storage Capacity (litres)200LPD

HOT WATER STORAGE TANK FPC PRESSURISED upto 4kg. 

Material

SS-304 or CRCA Enamel Coat

Tank Capacity

200 L

Thickness

2.5 mm

Prices INR

29,900

Material

SS-304 or CRCA Enamel Coat

OUTERTANK (SHELL)

Thickness 0.4mm Steel Powder coated

INSULATION

Material

PUF-50mm Thk

Density

32Kg/CBM

Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer),Other
  • Delivery Time: 15 days
Yes! I am interested

Solar Hot Water Storage Tank FPC Pressurised 300lpd

Solar Hot Water Storage Tank   FPC  Pressurised 300lpd
  • Solar Hot Water Storage Tank   FPC  Pressurised 300lpd
  • Solar Hot Water Storage Tank   FPC  Pressurised 300lpd
  • Solar Hot Water Storage Tank   FPC  Pressurised 300lpd
Get Best Quote
Approx. Price: Rs 35,900 / Piece

Product Details:

Minimum Order Quantity1 Piece
Storage Capacity (litres)300LPD

HOT WATER STORAGE TANK FPC PRESSURISED upto 4kg. 

Material

SS-304 or CRCA Enamel Coat

Tank Capacity

300 L

Thickness

3.5 mm

Prices INR

35,900

Material

SS-304 or CRCA Enamel Coat

OUTERTANK (SHELL)

Thickness 0.4mm Steel Powder coated

INSULATION

Material

PUF-50mm Thk

 

Density

32Kg/CBM

Request
Callback
Yes! I am interested

Hot Water Storage Tank FPC Pressurised 500lpd

Hot Water Storage Tank   FPC  Pressurised 500lpd
  • Hot Water Storage Tank   FPC  Pressurised 500lpd
  • Hot Water Storage Tank   FPC  Pressurised 500lpd
Get Best Quote
Approx. Price: Rs 41,900 / Piece

Product Details:

Minimum Order Quantity1 Piece
Storage Capacity (litres)500LPD

HOT WATER STORAGE TANK FPC PRESSURISED upto 4kg. 

Material

SS-304 or CRCA Enamel Coat

Tank Capacity

500 L

Thickness

3.5 mm

Prices INR

41,900

Material

SS-304 or CRCA Enamel Coat

OUTERTANK (SHELL)

Thickness 0.4mm Steel Powder coated

INSULATION

Material

PUF-50mm Thk

Density

32Kg/CBM

Request
Callback
Yes! I am interested

Solar Hot Water Storage Tank FPC Pressurized 1000lpd

Solar Hot Water Storage Tank FPC Pressurized 1000lpd
  • Solar Hot Water Storage Tank FPC Pressurized 1000lpd
  • Solar Hot Water Storage Tank FPC Pressurized 1000lpd
Get Best Quote
Approx. Price: Rs 86,900 / Piece

HOT WATER STORAGE TANK FPC PRESSURISED upto 4kg.

Material

SS-304 or CRCA Enamel Coat

Tank Capacity

1000 L

Thickness

3.5 mm

Prices INR

86,900

Material

SS-304 or CRCA Enamel Coat

OUTERTANK (SHELL)

Thickness 0.4mm Steel Powder coated

INSULATION

Material

PUF-50mm Thk

Density

32Kg/CBM

Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Non Return Valves(NRV's)

Non Return Valves(NRV's)
  • Non Return Valves(NRV's)
  • Non Return Valves(NRV's)
  • Non Return Valves(NRV's)
  • Non Return Valves(NRV's)
Get Best Quote
Approx. Price: Rs 690 / Piece
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Thermostatic Mixing Valves

Thermostatic Mixing Valves
  • Thermostatic Mixing Valves
Get Best Quote
Approx. Price: Rs 9,500 / Piece

Product Details:

Minimum Order Quantity1 Piece
ModelPoint of Use model
Size1/2"

SIZES AVAILABLE 1/2" 3/4" 1"

1/2" Rs.8900
3/4" Rs.16500
1" Rs. 26500

THERMOSTATIC MIXING VALVE

Addressing The Dangers of Hot Water Every year, thousands of people suffer injury or become ill as the result of water stored or used at inappropriate temperatures, leading to the potential for:

• Serious thermal shock and scalding injuries suffered in bathtubs, sinks, and showers is slips and falls in reaction to a sudden increase or decrease in water temperature, known as thermal shock.

• If the supply of cold or hot water is lost, the water flow should be shut down immediately.

• Termination of the flow reduces the risk of instinctive reaction to quickly move away from a too-hot or too-cold water stream.

Scalding

• Scalding incidents can occur in the home and in commercial or institutional facilities.

• The tender skin of very young children and the slow reaction time of the elderly and the handicapped make them particularly vulnerable to serious hot water burns.

• Other causes include faulty water heater thermostats and water temperatures set too high.

• Also, temperature valves at the domestic hot water source can malfunction or be missing altogether. • Water heaters are typically set to temperatures above 55°C to prevent development of harmful bacteria in the water supply, however, at that temperature scalding can occur.

Advantages of Thermostatic Mixing Valves :

· Maintain and limit mixed hot water to a desired, selectable temperature

· Provide a way to control outlet temperatures to help mitigate the risk posed by unmonitored, untempered water.

· Enable safe, accurate control of hot water from its source through to its final use, regardless of how the supply temperatures or pressures vary over time.

 

How Thermostatic Mixing Valves Work

· Once tempered water is in use, a thermostat in the mixing chamber of the valve senses the outlet temperature and automatically positions a seat assembly, which controls the flow of hot and cold water supplied to the mixing chamber.

· If the mixed outlet temperature increases, the thermostat will expand, moving the seat assembly to allow the cold water inlet port to open more fully and at the same time restrict the hot water inlet port.

· Conversely, if the mixed outlet temperature decreases, the thermostat will contract, moving the seat assembly to allow the hot water inlet port to open more fully and at the same time restrict the cold water inlet port.

· In both cases the mixed outlet water temperature is automatically and continually maintained at the preset temperature within the tolerances of the valve.

· In the event of a cold or hot water supply failure, the seat assembly moves to an extreme position, shutting off the hot or cold inlet water port.

· A mechanical adjustment permits selection of the desired outlet water temperature within the range of valve.

Request
Callback
Yes! I am interested

Water Level Controlers

Water Level Controlers
  • Water Level Controlers
Ask For Price
Feature:-
  • Microcontroller based intelligent circuit
  • Overhead tank sump water level sensing
  • Capable of controlling 2hp motor
  • Onboard 30A relay mounted
  • Dry run production in built
  • Terminals for easy installation
  • Operating Voltage 12v AC
  • Separate terminals connection for AC sensing voltage
  • Suitable for contact type non-contact type sensor
Application:-
  • Water level controllers for Residential building, industrial liquid level control, etc.
Warranty:-
  • One year on manufacturing defects.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Expansion Tank

Expansion Tank
  • Expansion Tank
  • Expansion Tank
  • Expansion Tank
  • Expansion Tank
Get Best Quote
Approx. Price: Rs 4,900 / Piece
An expansion tank or expansion vessel is a small tank used to protect closed (not open to atmospheric pressure) water heating systems and domestic hot water systems from excessive pressure. The tank is partially filled with air, whose compressibility cushions shock caused by water hammer and absorbs excess water pressure caused by thermal expansion.

The modern vessel is a small container or tank divided in two by a rubber diaphragm. One side is connected to the pipe work of the heating system and therefore contains water. The other, the dry side, contains air under pressure, and normally a Schrader valve (car-tire type valve stem) for checking pressures and adding air. When the heating system is empty or at the low end of the normal range of working pressure, the diaphragm is pushed against the water inlet; as the water pressure increases, the diaphragm moves, compressing the air on its other side.

An older style of expansion tank was larger, oriented horizontally, and had no rubber diaphragm separating the water from the air pocket. This now obsolete style would gradually transfer air from the tank to the highest point in the system, due to air dissolving in the water, and then coming out of solution elsewhere in the system. This in turn required regular draining of the expansion tank, as well as regular bleeding of the system, to maintain its effectiveness.

The rubber diaphragm in modern expansion tanks prevents this undesired transfer of air, and helps maintain low levels of oxygen, reducing corrosion in the system.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

RBM Air Vent

RBM Air Vent
  • RBM Air Vent
Get Best Quote
Approx. Price: Rs 2,900 / Piece
RBM Air Vent purpose of installation in hot cold water system to eliminate entrapped air in water lines. Prevent air locking due to filling of system or while priming of pump systems to increase thermal efficiency. To increase thermal efficiency fitted with check valve to prevent air being drawn back into system or water escaping from port event.

INSTALLATION: VERTICALLY
Normally RBM Air vent comes in 3/4 and 1 " sizes and used in parallel for solar water heater tanks of 500 litres and above sizes.

Components:
  • Valve body nickle plated in forged brass
  • Working temperatures 90°C
  • Working pressure range 6 bar - test pressure 16 bar
  • EPDM valve head
  • Float: plastic float (PP resin)
  • Lever: ASTM C36600
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

MITT Magnesium Anode Rod

MITT Magnesium Anode Rod
  • MITT Magnesium Anode Rod
Get Best Quote
Approx. Price: Rs 490 / Piece
MITT Magnesium Anode Rod
Magnesium anode rods are the most common type of anode rod. The magnesium anode rod protects the tank by corroding in place of the steel. Because the rod is designed to corrode, it will eventually wear away. It ideally used for water heaters, boilers and stainless steel containers where corrosion is common.

The first property to consider is their electrical potential. All metals generate a negative voltage when immersed in water.

The three most active metals used for sacrificial anodes are Zinc, Aluminum and Magnesium. The more negative the voltage, the more active the metal is considered, and magnesium generates negative 1.6 Volts compared to Zinc and Aluminum which generates negative 1.05 volts and 1.1 volts respectively. Hence, magnesium is highly preferred to give water heaters, solar heaters, boilers etc., a longer life.
How anode works:
When two metals are connected, water reacts with lower noble metal first. Anode rod is made from lower noble metal compared to the metal used in water heater, boilers etc. Water dissolves anode rod instead of rusting water heater, boilers etc. Thus, it increases efficiency, increases the life span and gives the optimum results. It greatly reduces maintenance cost and saves you time as well.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Solar Air Vent Size 3/4

Solar Air Vent Size 3/4
  • Solar Air Vent Size 3/4
Get Best Quote
Approx. Price: Rs 2,400 / Piece
HYDRAULIC FEATURES
This automatic air vent valve is a single float valve designed for solar thermal energy plants, and carries out two main functions: the evacuation of a consistent air flow through the system (e.g. during loading/pressurization of the plant), and degassing which discharges air trapped in the pipeline, while functioning, in particular in the solar collectors. This valve has a paramount importance in solar thermal energy plants, evacuating and discharging trapped air in the pipelines and in the solar collectors. As a matter of fact, the presence of oxygen in the system can provoke numerous negative phenomena such as anodic corrosion, localized noise, air pockets, obstructions, etc., which may significantly compromise the performance and integrity of the systems. These valves are usually installed at the summit of the primary circuit in a solar thermal energy plant, and are resistant to the high temperatures that the heat-transfer fluids can reach, even in stagnation phases. Their suitability for application in solar thermal energy plants conforms to EN 12976 and EN 12977.
TECHNICAL FEATURES
Pressure : 
Maximum allowable pressure (PN) 10 bar
Minimum sealing pressure 0.2 bar (Grade A according to EN 12266-1)
Range of operation air evacuation from 0.5 bar to 5 bar (tolerance ± 10% max. detected)
Temperature : 
Maximum allowable working temperature (TS) 180° C (200° C in brief periods)
Compatible fluids : 
Glycolate solutions (glycol) water and fluids Group 2
Heat transfer fluids in compliance with Italian national standards (UNI 8065 § 6) 
Generic Fluids 50%
Threading:  
Pipeline connection Threads according to ISO 228/1
Requirements and tests as per :  
EN 1074-4
DESIGN
Body and Plug in brass EN 12165 - CW617N
Seat and internal mechanisms Brass - EN 12164 - CW614N
Gaskets and o-ring FLUORINATED RUBBER (VITON - FPM)
Spring and counterweight STAINLESS STEEL EN 10088-14310 (AISI 302)
Nickel plating ELECTRODEPOSITED COATING EN 12540 (Cu/Ni5s)
PRODUCT SIZE
12 - M - 3/8"
15 - M - 1/2"
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

High Capacity Air Vent Size 1

High Capacity Air Vent Size 1
  • High Capacity Air Vent Size 1
Get Best Quote
Approx. Price: Rs 4,500 / Piece
HYDRAULIC FEATURES
The "High Flow Capacity" model automatic air vent is an automatic valve with single float, used for the evacuation and discharge of large volumes of air from water supply pipes. This sort of air vent may only be installed vertically. In order to maximize the efficiency of the discharge, it should be installed at the highest points in the system or, if this is not possible, a TEE fitting should be installed at the inlet, as in figure A. When installing at the top of an ascension pipe, a conveyable discharge hose can be installed (option available only on request). The particular spherical profile of the internal floater-obturator in special thermoplastic rubber forestalls water spatter during the sealing phase, in closure. The absence of sliding guides, hence drag, allows the spherical floater an elevated velocity and precision in closing besides avoiding dangerous incrustations. At the discharge outlet there is a protective catch for dust and lint, which, over time, could deposit upon the opening of the cap, obstructing it; moreover, being perforated, anti-tampering seals may be used in compliance with legislation currently in force.
The lower anti-spray guard allows the even distribution of hydraulic thrust across the entire surface of the sphere, limiting the turbulence to a minimum and guaranteeing a highly precise closure. The "High Flow Capacity" automatic air vent is used in conditioning plants, sanitary installations for water distribution destined for human consumption outside buildings under EN 805, and irrigation plants. The simplicity of the High Flow Capacity air vent renders maintenance usually unnecessary. However, in the event of water outflow from the upper seat of the air vent, substitute the internal sphere-obturator, which is easily accessible by dismounting the body cap. In case of prolonged inactivity, the device should be disinfected according to EN 805 §12. This product adheres to the standards set forth by the international health authorities for the transport of alimentary fluids and potable water.
TECHNICAL FEATURES
Pressure : 
Maximum allowable working pressure (PN) 16 bar
minimum accumulation 0.5 bar (Grade A according to EN 12266-1)
Range of operation air evacuation from 0.5 bar to 16 bar (tolerance ± 10% max. detected)
Temperature : 
Maximum allowable working temperature (TS) 0°C (excluding ice) +110°C
Threading :
Pipeline connection Threads according to ISO 228/1
Requirements and tests as per :  
Air vents EN 1074-4
Seat tightness EN 1074-4 §5.2.2
Pressure resistance EN 1074-4 §5.1.1
DESIGN
Body and cap in Brass EN 12165 - CW617N
O-ring NBR Rubber
Spherical floater THERMOPLASTIC ELASTOMER
Sphere guard ACETAL RESIN (POM)
PRODUCT SIZE
20 - M - 3/4"
25 - M - 1"
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Roma Air Vent Size 1

Roma Air Vent Size 1
  • Roma Air Vent Size 1
Get Best Quote
Approx. Price: Rs 6,500 / Piece
HYDRAULIC FEATURES
The "ROMA" model automatic air vent is an automatic valve with single float, used for the evacuation and discharge of large volumes of air from water supply pipes. The integrated tap device is equipped with a dual position 90° male seal. Position "A" communicates the system with the upper air discharge recess while position "B" bypasses the system discharge recess and permits its draining through the front slot. This renders it particularly ideal for installation in zones outside buildings where there is a high risk of freezing. The "ROMA" air vent valve may only be installed vertically. In order to maximize the efficiency of the discharge, it should be installed at the highest points in the system or, if this is not possible, a TEE fitting should be installed at the input, as in figure "C". When installing it at the top of an ascension pipe, a conveyable discharge hose can be installed (option available only on request). The particular spherical profile of the internal floater-obturator in special thermoplastic rubber forestalls water spatter during the sealing phase, in closure. The absence of sliding guides, hence drag, allows the spherical floater an elevated velocity and precision in closing besides avoiding dangerous incrustations. At the discharge outlet there is a protective catch for dust and lint, which, over time, could deposit upon the opening of the cap, obstructing it; moreover, being perforated, anti-tampering seals may be used in compliance with legislation currently in force.

The lower anti-spray guard allows the hydraulic thrust to be distributed evenly across the entire surface of the sphere, limiting the turbulence to a minimum and guaranteeing a highly precise closure. The "ROMA" model air vent is used in conditioning plants, sanitary installations for water distribution destined for human consumption outside buildings under EN 805, and irrigation plants. Maintenance of the "ROMA" model air vent consists in the periodic verification of the closure of the integrated stop device. The male obturator can be checked by tightening the front hexagonal nut while moving the lever from position "A" to position "B" and vice versa. The lever should only be actioned manually and not with the help of any tools. In the event of water outflow from the upper seat of the air vent, substitute the internal sphere-obturator, which is easily accessible by dismounting the body cap. In case of prolonged inactivity, the device should be disinfected according to EN 805 §12. This product adheres to the standards set forth by the international health authorities for the transport of alimentary fluids and potable water.
TECHNICAL FEATURES
Pressure : 
Maximum allowable working pressure (PN) 16 bar
minimum accumulation 0.5 bar (Grade A according to EN 12266-1)
Range of operation air evacuation from 0.5 bar to 16 bar (tolerance ± 10% max. detected)
Temperature : 
maximum working temperature (TS) 0° C(excluding ice) +110°C
minimum plant storage -20° C (with recess fluid discharged)

Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Safety Relief Valve for Boilers with Lever Handle

Safety Relief Valve for Boilers with Lever Handle
  • Safety Relief Valve for Boilers with Lever Handle
Get Best Quote
Approx. Price: Rs 1,500 / Piece

Size ¾ =Rs.1200

 

Size 1” = Rs.1500

 

 

A safety valve is a valve mechanism for the automatic release of a substance from a boiler, pressure vessel, or other system when the pressure or temperature exceeds preset limits. 

Body in nickel-plated brass
Check and vent spring in stainless steel
Check seat in nylon
Check and vent seal in NBR
Maximum working temperature: 120°C
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Solar Safety Valve

Solar Safety Valve
  • Solar Safety Valve
Get Best Quote
Approx. Price: Rs 1,600 / Piece

Size ¾ = Rs.1300

 

Size 1” = Rs.1600

 

HYDRAULIC FEATURES
The Solar safety valve with manual handwheel is an automatic safety valve designed to open in the event the internal pressure of the system reaches a predetermined maximum pressure (Preset Nominal Pressure Pnr)allowing the water to be released through it. The safety valve resets automatically when the internal pressure of the system returns below the predetermined maximum pressure. All the moving parts of this safety valve, including the regulating spring, are isolated from heat-transfer fluids by an industrial rubber diaphragm. The Solar safety valve with manual handwheel satisfies the essential safety requirements stipulated in the EU Pressure Equipment Directive (PED) 97/23/EC.
TECHNICAL FEATURES
Pressure : 
Maximum allowable working pressure (PS) 10 bar
Preset nominal pressure (Pnr) 2.5-3-4-6-8 bar (factory set and sealed)
Minimum sealing pressure (Pc) -5 % of the Pnr
Overpressure (Po) 10% of the Pnr
Reset value (Pf) -20 % of the Pnr
Temperature : 
Pipeline connection 160° C
Threading : 
Maximum allowable Threads according to ISO 228/1

 


Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Brass Ball Valve

Brass Ball Valve
  • Brass Ball Valve
Get Best Quote
Approx. Price: Rs 1,200 / Piece

Size ½” = Rs.650/-

 

Size ¾” = Rs.950


Size 1” = Rs.1200

 

In operation spanning almost a decade and an active network penetrating the entire country we strive to bring to your doorstep the best quality Valves which is a result of our continuous research in plumbing, metallurgy and healthcare. Your safety, health and convenience have been of our paramount consideration while designing these valves.

APPLICATION

Replace gate valves, Suitable for industrial, pneumatic domestic and hydraulic installations, water and air lines.

INSTALLATION

The end threads are parallel, over tightening while installing would not aid better sealing. It is advisable to sue sealing medium like Teflon tape for a leak tight joints. Excessive torque should be avoided as this could cause the ends to crack.

OPERATION

All valves are supplied with levers fitted for quarter-turn operation. These levers are adjusted for open/close positions and should not be disturbed. 

Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Metal Seat Check Valve

Metal Seat Check Valve
  • Metal Seat Check Valve
Get Best Quote
Approx. Price: Rs 990 / Piece

Size ½ = Rs.580

 

Size ¾ = Rs.875

 

Size “1” = Rs.990



Suitable for industrial, pneumatic and hydraulic installations. Ideal for hot / cold water, different oils and compressed air. It can be fitted in horizontal, vertical or oblique position.

 

TECHNICAL FEATURES:

Minimum and Maximum working temperature:

Air: -20° C, 110° C

Water: 0° C, 90° C

Gas: -20° C, 60° C

Available: In all sizes from ⅜" up to 4".

Thread: ISO228 - DIN259 - Bs2779


Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Y Strainer Valve

Y Strainer Valve
  • Y Strainer Valve
Ask For Price

Size ½ = Rs.550

 

Size ¾” = Rs.850

 

Size “1” = Rs.1350


HYDRAULIC FEATURES

Filters used for heating, sanitary systems, compressed air, water distribution.


TECHNICAL FEATURES

Max inlet working pressure:(Mod.246) 10 bar
(Mod.249) 25 bar
(Mod.250) 25 bar
(Mod.114.5) 25 bar

Max temperature (water):(Mod.246) 80°C
(Mod.249) 150°C
(Mod.250) 150°C
(Mod.114.5) 150°C

Max inlet working pressure:UNI ISO 228/1

CONSTRUCTION

Mod.250:Size ½" - 2" in brass EN 1982 - CB753S
Mod.246:Size ½" - 1" in brass EN 12165 - CW617N
Size 1"¼ - 2" in brass EN 1982 - CB753S
Mod.249 (114.5):Size ½" - ¾" in brass EN 12165 CW617N
Size 1"- 2" in brass EN 1982 - CB753S
Size 2"½ - 4" in bronze UNI 7013-72

Cartridge made of stainless steel Washer plug NA 1030 

Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested
X
Looking for “SOLAR GEYSER SPARES”?


Reach Us
Sri Ramachandra Murthy Peri (Proprietor)
101, No. 72-5-124/1, S S K Kandaries, Bharat Nagar Besides Indian Bank, Moosapet
Hyderabad- 500038, Telangana, India


Call Us

Send E-mail

Send SMS